Lorex Live LNC100 Series - Fixed IP Access

51
L-View 104 for PC
English
3.8.3 FIXED IP ACCESS
The Fixed IP Access menu is for advanced users only. It must be used if you have
assigned your camera a fixed IP address on your router.
Check to enable Fixed IP
addresses for cameras
To configure your camera to use a fixed IP address:
1. Check Connect to the camera
with a fixed IP address to enable cameras to use fixed
IP addresses.
2. Click OK t
o
save changes.
3. In the camera list, right-click the camera yo
u would like to configure and select
Assign IP Address.
Assign IP address
4. Enter the camera’s internal IP address and click OK.