48
L-View 104 for PC
be triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
2. Click Update t
o
save changes. Enter the camera admin User Name (default: admin)
and Password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
3.7.4 CAMERA INFO TAB
The camera info tab shows system information about the camera.
To Next Page
Loading...
