63
L-View for Mac
English
4.5.3 CONTROL TAB (CONFIGURE STATUS LED’S AND MOTION
DETECTION SENSITIVITY)
Configure status LED’s
Configure motion detection
sensitivity from 1 (High) to 10 (Low)
The Control tab allows you to configure the camera status LED’s to make the camera
harder to spot at night. It also allows you to configure the motion detection sensitivity
when using video motion detection.
To configure the camera status LED’s:
1. Right-click the camera in Camera List and click Video settings. Then
, sel
ect the
Control tab.
2. Under Status LED Contr
o
l, select one of the following:
• Normal: LED’s will function as normal. For det
ails on LED functions, see “Camera
Overview” on page 1.
• Always turn off: LED’s are turned off at all times.
• Turn off after connected: LED’s turn on when the camera is powered on and turn off
once a network connection is made.
3. Click Update to
save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. Click OK to exit the settings window.
NOTE: The camera may reboot after settings are changed. Wait about 30 seconds and
t
h
en double-click the camera in Camera List or Auto Search to reconnect to the camera.
To configure motion detection sensitivity:
NOTE: T
he following method works when using video motion detection. It does not work
when using PIR motion detection. For details on enabling motion detection and selecting
video motion detection or PIR, see “Sc
hedule” on page 143.
1. Right-click the camera in Camera List and click Video settings. Then, sel
ect the
Control tab.
To Next Page
Loading...
Need help?
General
