33
L-View 104 for PC
English
3.3 CAMERA LIST (MANAGING CAMERAS)
The Camera List is used to save connection information for your cameras, so you don’t
have to re-enter the ID or password each time you connect. The Camera List also allows
you to configure certain camera settings.
Cameras connected to the Internet or local network are shown in blue in the camera list.
Cameras not connected are shown in red. If your camera is red, check the network
connection.
NOTE: Cameras may appear in red before you have connected to them the first time.
3.3.1 ADDING CAMERAS TO CAMERA LIST
• If the camera is on the local network, click and drag a camera from the Auto Search
list to Camera List to add it.
• If the camera is not on the local network (i.e. you are connecting to it over the Internet),
see “Connecting to a Camera Over the Internet (PC)” on page 7 to add the camera
to the Camera List.
Click and drag camera from
Auto Search to Camera List
To Next Page
Loading...
