135
Configuring Camera Settings using a Web Browser
English
8.2 NETWORK
Configure networking settings for WiFi or Ethernet connection.
8.2.1 WIRED NETWORK (DHCP OR FIXED IP)
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To configure the camera to use DHCP or fixed IP:
1. Select one of the following:
• Obtain an IP addr
ess automatically (recommended): Use DHCP and allow the
camera to obtain an IP address from the router automatically.
• Use the following IP address: Use a fixed IP address and manually enter the IP
address information.
2. If you selected Use the following IP address, configure the following:
• IP address: E
nter the IP address the camera will use. Make sure it is available on
your network.
• Subnet mask: Enter the Subnet Mask.
• Default Gateway: Enter the Default Gateway address.
• Obtain DNS server address automatically: Select to have the camera automatically
select a DNS server.
To Next Page
Loading...
Need help?
General
