9
Getting Started
English
2.2.2 CONNECTING TO YOUR CAMERA ON MAC
To connect to your cameras using a Mac, you must install L-View for Mac, which is
available as a free download from www.lorextechnology.com. The steps to connect to
cameras are different depending on if you are connecting to a camera on a local network
(i.e. your computer is connected to the same router as the camera) or over the Internet.
Installing L-View for Mac
1. Download L-View Client Softwar
e for Mac from www.lorextechnology.com.
2. Extract the installer file and double-click it to run.
3. Click and drag the L-View icon and the L-Play icon to Applications t
o
install.
Click and drag L-View and
L-Play to Applications
Connecting to your Camera on the Local Network (Mac)
1. Connect the camera to your router using an ethernet ca
ble and connect the power
adapter to power on the camera. Please note that your computer must be on the
same network as the camera.
2. Open L-View (
) from your Applications list. L-View scans for cameras on your
local network.
3. Double-click the camera ID.
Double-click
the camera ID
To Next Page
Loading...
Need help?
General
