Lorex Live LNC100 Series - Editing Camera Wired Network Settings

78
iPhone App
• Manual: Manually select day mode or night mode. If using this option, select Day for
day mode or Night for night mode.
4. Tap Update to save your changes.
5.4.8 EDITING CAMERA WIRED NETWORK SETTINGS
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera
Settings.
3. Tap Netwo
rk then Wired Network.
Select DHCP or Static
If Static, configure IP
address information
Select Manual
Select Day or Night mode