64
L-View for Mac
2. Under Motion Detection Sensitivity, select the motion detection sensitivity between
1 (High) and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will
be triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
3. Click Update t
o
save changes. Enter the camera admin User Name (default: admin)
and Password (default: left blank) and click OK. Click OK to exit the settings window.
NOTE: The camera may reboot after settings are changed. Wait about 30 seconds and
t
h
en double-click the camera in Camera List or Auto Search to reconnect to the camera.
4.5.4 CAMERA INFO TAB
The camera info tab shows system information about the camera.
To access the camera info tab:
• Right-click on the camera in Camera List and select Video Sett
ings. Then select the
Camera Info tab.
To Next Page
Loading...
