152
Configuring Camera Settings using a Web Browser
2. In L-View, right-click on the camera in Auto Search and click Web Configure.
Right-click the camera under Auto
Search and click Web Configure
3. Type the camera admin User Name (default: admin) and Password (default: left
blank) and click Ok to log into the camera.
4. Click Admi
n then click Upgr
ade.
5. Select Upgrade from local file.
6. Click Browse, l
ocate the firmware upgrade file, and then click Open.
7. Click Upgra
de. Wait for the firmware upgrade to complete. Do not disconnect the
power or network cable during the firmware upgrade. The camera will reboot once
firmware upgrade is complete.
Click Browse and
select firmware file
Select Upgrade from
local file
Click Upgrade
To Next Page
Loading...
Need help?
General
