82
iPhone App
3. Tap Schedule then Speaker Alarm.
Select speaker alarm triggers
Test speaker alarm
Select number of times speaker alarm will
repeat
4. Under Speaker Alarm Trigger, check the triggers that will cause speaker alarms:
• Motion: Use Video motion dete
ction to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger audio alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may
al
so select both PIR and Motion to receive alarms from both motion
triggers.
• Schedule: Create audio alarms based on the settings set in the Scheduling menu.
• Disabl
e: Disable speaker alarms.
5. Under Alarm Loop Times, sele
ct the number of times you would like the speaker
alarm to repeat when alarms occur.
6. Tap Alarm T
e
st to sound a test alarm.
7. Tap Update t
o save your settings.
To Next Page
Loading...
Need help?
General
