EasyManuals Logo

Lorex LNR600 Series User Manual

Lorex LNR600 Series
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Basic Setup (LNR600 Series)
5
If a firmware upgrade is available:
1. After startup, a notification will appear asking you to upgrade the firmware. Click OK to
upgrade.
2. Enter the system user name (default: admin) and password (default: 000000) and
click OK. Wait for the firmware update to complete. The system will restart once the
firmware has been upgraded.
WARNING
DO NOT POWER OFF THE SYSTEM OR DISCONNECT THE POWER CABLE DURING FIRM-
WARE INSTALLATION
5.7 Step 7: Verify Camera Image
Power on the cameras, and then verify the camera video quality before mounting the
cameras to a permanent location.
Mount the cameras under a sheltered location. Always verify the outdoor rating of your
camera before installing it in a permanent location.
5.8 Step 8: Set the Time
Set the system time and date for accurate video time stamps. Videos with inaccurate
times may not be valid as surveillance evidence.
For details on setting the system time, see 9 Setting The Time, page 23.
5.9 Default System Password & Port Numbers
CAUTION
By default, the system user name is admin and the password is 000000. It is essential that you create
your own password. For details, see 13 Managing Passwords and User Accounts, page 37.
The system requires a user name and password to log in to the system remotely using a
computer. After logging on remotely the first time through FLIR Cloud™, you will be asked
to create a custom password for the system.
Local system and remote connectivity (LAN & Internet) user name and password:
Username: admin
Password: 000000
Default ports for DDNS remote access:
Port 80 (HTTP port)
Port 35000 (Client port)
5.10 Quick Access to System Information
To quickly open a window that displays vital system information:
Right-click to open the Quick Menu and click Info. Enter the system user name (default:
admin) and password (default: 000000).
OR
Press the
button on the front panel.
OR
Press the ENTER button on the remote control.
#LX400078; r.36882/36882; en-US
9

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lorex LNR600 Series and is the answer not in the manual?

Lorex LNR600 Series Specifications

General IconGeneral
BrandLorex
ModelLNR600 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals