Basic Setup (LNR600 Series)
5
INFO Screen:
NOTE
The QR code shown in the System Info screen can be scanned during mobile setup to enter the system’s
Device ID.
5.11 Connecting Cameras to the Local Area Network (LAN)
For flexibility, you may also connect IP cameras to the same Local Area Network (LAN) as
the NVR. This is accomplished by connecting the cameras to the same router as the NVR.
For these installations, an external PoE switch (sold separately) or power adapter (sold
separately) must be used to provide power to each IP camera. You also must add the cam-
eras on the NVR before they will show a picture on the monitor or be recorded by the NVR.
Follow the steps below to connect the cameras to the NVR over the LAN.
NOTE
• Compatible with Lorex HD IP cameras. For a list of compatible cameras, please visit
www.lorextechnology.com/support.
• Camera and NVR images in this section are used for illustration only.
Step 1 of 2 — Option A: Connecting cameras to your local network using a PoE
switch:
#LX400078; r.36882/36882; en-US
10
To Next Page
Loading...
Need help?
General
