Using the Main Menu14
3. Click OK to save changes. The system will restart to complete the formatting process.
14.3.22 Configuring Hard Drive Type
The system supports the following hard drive types:
• Read/Write: Normal recording hard drive.
• Read only: The system can playback data from this hard drive, but it will not record to it.
• Mirror: The hard drive will be used for mirror recording only. You must set up mirroring
recording before this feature will work.
To set the hard drive type:
1. From the Main Menu, click
and then click Storage>HDD Manager.
2. Click the hard drive you would like to configure.
3. Under Type, select Read/Write, Read only, or Mirror.
4. Click OK to save changes. The system will restart to complete this operation.
14.3.23 Setting up Hard Drive Mirroring (Advanced)
A mirror hard drive can be used to automatically backup video footage recorded to the re-
cording (read/write) hard drive. When a mirroring hard drive is installed, the system can be
set to record cameras in parallel to both the recording hard drive and the mirror hard drive.
This way, the footage is automatically backed up if the recording hard drive fails.
How hard drive mirroring works:
1. Security system.
2. Primary hard drive.
3. Mirror hard drive.
#LX400078; r.36882/36882; en-US
70
To Next Page
Loading...
Need help?
General
