LTV 1150 - Page 133

p/n 18603-001, Rev. C LTV
®
1200/1150 Ventilator Service Manual Page 8-11
5) Torque tighten the mounting screws to these specified values.
• Torque tighten the screws in the legs of the boot to 60 in-oz (0.42 Nm)
• Torque tighten the screws in the sides of the boot to 20 in-oz (0.14 Nm)
CAUTION
Damage to finish washers -Do not over tighten screws to avoid damage to the finish
washers.