p/n 18603-001, Rev. C LTV
®
1200/1150 Ventilator Service Manual Page 6-33
Configuration
The Configuration menu is used to set the operational parameters for LTV
®
ventilators. The
Configuration menu is set up as follows:
CONFIG
MODEL
FLOW VALVE
TEMP COMP
SERIAL NUM
20
CONFIG EXIT
1) Use the Set Value knob to rotate between options.
2) To select an option, press Select while it is displayed in the window.
3) Pressing Control Lock exits to the previous menu without making any selections.
The menu selections are described further in the following pages.
NOTE
The configuration menus are used to configure many models of LTV
®
.
20
The Serial Number menu option is for use by Pulmonetic Systems personnel only.
To Next Page
Loading...
