Page 8-14 LTV
®
1200/1150 Ventilator Service Manual p/n 18603-001, Rev. C
6) Torque tighten the mounting screws to these specified values
• Torque tighten the screws in the legs of the boot to 60 in-oz (0.42 Nm)
• Torque tighten the screws in the sides of the boot to 20 in-oz (0.14 Nm)
CAUTION
Damage to finish washers -Do not over tighten screws to avoid damage to the finish
washers.
To Next Page
Loading...
