EasyManua.ls Logo

LTV 1150 - Motor Drive Calibration; Perform a Patient Outlet Pressure test.; Calculate Actual Turbine Speed (T;S); Measure Patient Outlet Pressure at Actual Turbine Speed (T;S)

Default Icon
341 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
p/n 18603-001, Rev. C LTV
®
1200/1150 Ventilator Service Manual Page 2-5
Displays illuminate in the following colors:
Display Color Display Color
Airway Pressure Display Green Assist/Control Mode LED Green
Display Window Red SIMV/CPAP Mode LED Green
Breath Rate Green NPPV Mode LED Green
Tidal Volume Green Inspiratory / Expiratory Hold LED Green
Pressure Control Green Manual Breath LED Green
Inspiratory Time Green Low Pressure O
2
Source LED
2
Green
Pressure Support Green Control Lock LED Green
O
2
% (O
2
Flush)
2
Green
PEEP Green
Sensitivity Green Patient Effort LED Green
High Pressure Limit alarm Red External Power LED Not tested
Low Pressure alarm Red Charge Status LED Not tested
Low Minute Volume alarm Red Battery Level LED Amber
On/Standby LED Green Vent Inop LED Not tested
Volume Mode LED Green Silence Reset LED Red
Pressure Mode LED Green
If the ventilator fails the display test, see Chapter 7 - Troubleshooting for more information.
2
Available on the LTV
®
1200 Only.

Table of Contents

Related product manuals