5. Enter get config
Response: Received XXXXX bytes in X seconds
tftp> (For example, Received 89740 bytes in 5.4 seconds
tftp>)
6. Enter binary
Response: tftp>
7. Enter get cnfgload.cmp
Response: Received XXXXX bytes in X seconds
tftp>
(For example, Received 7622 bytes in 4.6 seconds
tftp>)
8. Enter quit
Response: #
9. Enter ls -l
Response: total XXX
-rw-r--r-- 1 root other XXXX Jul 26 10:23 cnfgload.cmp
-rw-r--r-- 1 root other XXXX Jul 26 10:23 config
X = size of directory and files.
10. Perform Procedure 4.4, Backup Administrative Workstation Operating System.
11. Stop. You have completed this procedure.
NETWORK PROCEDURES
Procedure 3.3
235-200-150
April 2004
Page 3.3-2 Issue 3.00G
To Next Page
Loading...
Need help?
General