Do you want to change the default boot device to the secondary disk
(disk1)? no
28. When prompted, enter return to continue.
29. From the Administrative Workstation Main Menu, select "Boot the Workstation”.
Answer yes to the confirmation. If you select a task by mistake, answer no to the
confirmation.
You have chosen to boot the workstation. If the Emulator is running,
it must be halted before continuing. Refer to the Main Menu item of
Halt the Emulator.
Do you want to continue? (yes/no) yes
The AW will boot on the primary disk and automatically start the AM emulator.
30. Is the system booted and running the emulated AM environment?
If YES, proceed with Step 31.
If NO, seek technical assistance.
31. If a login prompt does not appear, press return repeatedly until one appears.
32. At the login prompt, login as root.
33. Enter the following command to set the system crash dump device to the primary
disk.
dumpadm -d /dev/dsk/c1t0d0s1
34. Log off (exit).
35. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
235-200-150
October 2005
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.3
Issue 3.00B Page 4.5.3-5
To Next Page
Loading...
Need help?
General