EasyManua.ls Logo

Lucent 5ESS DRM - Page 214

Default Icon
642 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the AW is a Netra 20 or Netra 240, follow “Format the Primary or Secondary
Disk from a Boot CD-ROM (Netra 20 or Netra 240), Procedure 4.5.8.
After the new disk is formatted, the AW will reboot and automatically start the
AW emulator.
12. Is the system booted and running the emulated AM environment?
If YES, proceed with Step 13.
If NO, seek technical assistance.
13. Halt the emulator. See “Halt the Administrative Module (AM) Emulator”,
Procedure 4.1.
14. Switch to the AW by holding down the Ctrl key and pressing Enter (not Return).
15. If a login prompt does not appear, press Return repeatedly until one does.
16. At the login prompt, login as awadmin:
console login: awadmin
17. From the Administrative Workstation Main Menu, select "Backup the
workstation Operating System/Emulator to disk.” to execute. If you select a task
by mistake, answer no to the confirmation, and the main menu will return.
18. From the Operating System/Emulator Backup To Secondary Disk Menu, select
“Execute backup of the workstation Operating System/Emulator to disk”. Answer
yes to the following confirmation. If you select a task by mistake, answer no to
the confirmation.
Response:
You have chosen to backup the workstation Operating System/Emulator to
disk.
Do you want to continue? (yes/no) yes
19. If the AW is a Netra t 1120, answer no to the following response:
Response:
Do you want to set the secondary disk bootable? no
If the AW is a Netra 20 or Netra 240, and the secondary disk is the non-active
disk, answer yes to the following response:
Response:
Do you want to set the secondary disk bootable? yes
When completed, you will be prompted to press return. When the prompt
appears, press return.
20. Select "Return to the main menu.”
21. From the Administrative Workstation Main Menu, select "Boot the Workstation”.
Answer yes to the confirmation. If you select a task by mistake, answer no to the
confirmation.
Response:
You have chosen to boot the workstation. If the Emulator is running,
it must be halted before continuing. Refer to the Main Menu item of
Halt the Emulator.
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.6
235-200-150
October 2005
Page 4.5.6-2 Issue 3.00B

Table of Contents