Do you want to continue? (yes/no) yes
The AW will boot on the primary disk and automatically start the AM emulator
22. Is the system booted and running the emulated AM environment?
If YES, proceed with Step 23.
If NO, seek technical assistance.
23. Switch to the MCC by holding down the Ctrl key and pressing Enter (not Return).
Wait for page 111 to be redisplayed.
24. Go to MCC page 111/112 and use the 30X command to restore MHD 1 and 3 to
service.
25. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
235-200-150
October 2005
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.6
Issue 3.00B Page 4.5.6-3
To Next Page
Loading...