8. From the main menu, select “Change the Workstation Default Boot Disk”. If
given multiple disks to choose from, select the appropriate task number to set the
desired default boot disk:
Response:
1) Change the Workstation Default Boot Disk to Primary Disk
2) Change the Workstation Default Boot Disk to Secondary Disk
3) Return to the Main Menu
Select task by number(1-3):
If prompted to set the primary disk as the default boot disk and the primary disk
is the desired default boot disk, enter yes:
Response:
Do you want to change the default boot device to the primary disk
(disk0)? yes
If prompted to set the secondary disk as the default boot disk and the secondary
disk is the desired default boot disk, enter yes:
Response:
Do you want to change the default boot device to the secondary disk
(disk1)? yes
9. From the main menu, select “Boot the Workstation on the Default Boot Disk”.
Answer yes to the confirmation. If you select a task by mistake, answer no to the
confirmation.
Response:
You have chosen to boot the workstation …
Do you want to continue? (yes/no) yes
The AW will boot and automatically start the AM emulator.
10. Is the system booted and running the emulated AM environment ?
If YES, STOP. YOU HAVE COMPLETED THIS PROCEDURE.
If NO, seek technical assistance.
235-200-150
October 2005
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.8
Issue 3.00B Page 4.5.8-3
To Next Page
Loading...
Need help?
General