5. Pull the DVD drive toward you until it is free of its connectors and out of the
server.
6. Push the replacement DVD drive firmly into the drive slot until the DVD
connector is inserted into the system and the clips engage with the chassis (see
Figure 4.17-2).
7. Close the bezel until it is locked in place.
8. Restore power to the AW (see “Restore Power to Administrative Workstation
Units (Netra 240)”, Procedure 4.10).
9. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
Figure 4.17-2 — NETRA 240 Front Fingerholds
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.17
235-200-150
October 2005
Page 4.17-2 Issue 8.00O
To Next Page
Loading...