Note: Prior to the response, there will be completed responses for the switching
module, and the AM.
Response: BKUP NRODD COMPLETED
Note: Database backup will take several minutes to complete.
5.11.8.6 Reschedule Automatic Office Dependent Data Backup, If Necessary
1. At the MCC, type and enter: BKUP:ODD,EVERY=c,AT=d;
Where: c = Interval in days (0-90) between successive ODD backup runs
d = Time of day in hours and minutes (0-2359).
Response: OK
5.11.8.7 Recommended Soak Period
1. Monitor the ROP output for any peripheral fault recovery error messages. If any
such messages occur within a period of 30 minutes take appropriate action to
determine the reason; and, correct the reported error(s), if necessary, before
continuing.
2. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
235-200-150
January 2003
ROUTINE MAINTENANCE
Procedure 5.11
Issue 3.00 Page 5.11-13
To Next Page
Loading...
Need help?
General