5.11.8 RESTORE CONTROLS
5.11.8.1 Allow Brevity Control
1. At the MCC, either:
type and enter: ALW:BREVC,SM=a;
or
type and enter: 709 (1800,a CMD)
Where: a = Switching module number.
Response: OK
5.11.8.2 Return Message Classes to Previous Print Status
1. At the MCC, type and enter:
CHG:LPS,MSGCLS=ALL,FROMBKUP;
Response: OK
5.11.8.3 Turn Off Fault Recovery Reports
1. At the MCC, either:
type and enter: CLR:PERPH,SM=a,VERBOSE;
or
type and enter: 512 (1800,a CMD)
Where: a = Switching module number.
Response: OK
5.11.8.4 Allow Routine Exercises
Caution: All routine exercises inhibited earlier in the procedure must be
allowed. Failure to do this may result in office degradation over time.
1. At the MCC, type and enter:
ALW:DMQ,SRC=REX;
Response: ALW DMQ ENABLED REX
2. At the MCC, either:
type and enter: ALW:REX,SM=a;
or
type and enter: 702 (1800,a CMD)
Where: a = Switching module number.
Response: OK
5.11.8.5 BackUp Office Dependent Data
1. At the MCC, type and enter:
BKUP:ODD,NRODD=a,RODD,AM;
Where: a = Switching module number.
ROUTINE MAINTENANCE
Procedure 5.11
235-200-150
January 2003
Page 5.11-12 Issue 3.00
To Next Page
Loading...