Warning: Do not hit the break key on the dial-up Sun console
terminal. Sending a break on the DRM’s Sun console port will cause
the Sun workstation to halt. If a break is inadvertently sent, an ok
prompt will be displayed on the Sun console. Simply type and enter go
at the ok prompt to allow the administrative workstation to resume
operation.
d. Drop the dial-up Sun console connection. Type and enter: +++ at the dial-up
Sun console terminal to enter the modem’s online command mode. Then,
type and enter: ATH0 to drop the connection.
22. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
GROWTH AND DEGROWTH
Procedure 8.6
235-200-150
October 2005
Page 8.6-6 Issue 3.00B
To Next Page
Loading...
Need help?
General