5. Restore TTY x to service.
Note: If a baud rate other than 1200 is desired, "Update the Office Record
Printer Baud Rate," Subprocedure 8.14.1, should be performed before restoring
the TTY to service.
(a) At MCC, type and enter the appropriate message:
RST:TTY=x
Where: x = appropriate TTY number.
Response: RST TTY x COMPLETED
(b) Enter CARRIAGE RETURN
Response: FORM INSERTED
(c) Type and enter: <
Response: Exit the ttyadd form.
(d) Type and enter: <
Response: Exit the recent change session.
6. Backup Incore ECD to disk.
(a) At MCC, do Steps b through i.
Figure 8.14-3 — Office Record Printer Installation (
Netra
240)
GROWTH AND DEGROWTH
Procedure 8.14
235-200-150
October 2005
Page 8.14-4 Issue 3.00B
To Next Page
Loading...