8.17 Perform STLWS Degrowth
PROCEDURE
1. Remove TTY x from service. At MCC, type and enter the appropriate message:
RMV:TTY=x
Where: x = appropriate TTY number.
Response: RMV TTY x COMPLETED
2. Enter UNIX
1
RTR Recent Change and Verify.
(a) Is MCC or STLWS terminal to be used?
For MCC, proceed to Step b
For STLWS proceed to Step i.
(b) At MCC, ensure terminal is in command mode.
(c) At MCC, do Steps d through h.
(d) Type and enter: 199
Response: RCV PARAMETER INFO page displayed with cursor at 1.
database_name
(e) Type and enter: incore
Response: 2. review only
(f) Type and enter: n
Response: 3. journaling
(g) Type and enter: *
Response: RCV INITIALIZATION IN PROGRESS message displayed.
UNIX RTR RCV (ODIN) - Data Entry page displayed.
(h) You have completed Enter UNIX RTR Recent Change and Verify, proceed to
Step 3.
(i) At STLWS terminal, type and enter: RCV:MENU:DATA,RCVECD
Response: RCV ECD PARAMETER INFO page displayed with cursor at 1.
database_name
(j) Type and enter: incore
Response: 2. review only
(k) Type and enter: n
Response: 3. journaling
(l) Type and enter: *
Response: RCV INITIALIZATION IN PROGRESS message displayed.
UNIX RTR RCV (ODIN) - Data Entry page displayed. Cursor
at Enter Form Name:
3. Enter high-level forms.
1. Registered trademark in the United States and other countries, licensed exclusively through X/Open
Company, Limited.
235-200-150
January 2003
GROWTH AND DEGROWTH
Procedure 8.17
Issue 3.00 Page 8.17-1
To Next Page
Loading...
Need help?
General