8. You have completed the Select and Prepare Terminal for the MCC,
proceed to Step b.
9. At the RC/V terminal, type and enter the following message:
RCV:MENU:APPRC:VERBOSE,PRINT
Response: RECENT CHANGE AND VERIFY CLASS menu page
displayed.
(b) Type and enter: 5.5
Response: Enter Database Operation
I=Insert, R=Review, U=Update, D=Delete
(c) Type and enter: d
TRUNK MEMBER page displayed. Cursor at TGN attribute.
(d) Input the appropriate TGN and MEMB NBR:
Response: System completes remainder of view.
Enter Delete, Change, Validate, or Print:
(e) Type and enter: d
Response: Deleting....FORM Deleted TRUNK MEMBER page displayed.
Cursor at TGN attribute
(f) Repeat Steps b through e for each member number. This deletion may have
to be done four times because there can be two MEMB NBR entries for both
ac and dc jacks
(g) Type and enter: <
Response: 5.0 TRUNKS –– TGN & MEMBER VIEWS page displayed.
6. Delete the STLWS trunk group.
(a) Type and enter: 5.1
Response: Enter Database Operation
I=Insert, R=Review, U=Update, D=Delete
(b) Type and enter: d
Response: TRUNK GROUP page displayed. Cursor at TGN attribute.
(c) Type and enter the appropriate TGN
Response: System completes remainder of view.
Enter Delete, Change, Validate, or Print:
(d) Type and enter: d
Response: Deleting.....FORM DELETED TRUNK GROUP page displayed.
Cursor at TGN attribute.
(e) Type and enter: <
Response: 5.0 TRUNKS –– TGN & MEMBER VIEWS page displayed.
(f) Type and enter: q
7. Remove the AC and DC jacks.
235-200-150
January 2003
GROWTH AND DEGROWTH
Procedure 8.17
Issue 3.00 Page 8.17-3
To Next Page
Loading...