BIT 1: The AM’s high speed cache unit is not being used.
BIT 0: Indicates the System Integrity Monitor process (SIM)
has been prevented from initiating any action to
recover from a fault.
Digit 21 = Configuration control options.
The bits are numbered from right to left as follows:
BIT32 10
BIT 3: Indicates the AM has been booted using the backup
root file system.
BIT 2: Indicates the AM has been booted in the minimum
configuration mode. Application software and hardware
has been disabled.
BIT 1: UNUSED (Also undefined - may be 0 or 1).
BIT 0: UNUSED (Also undefined - may be 0 or 1).
BACKUP
FILE SYSTEM
BEING USED
MINIMUM
CONFIGURATION
BEING USED
UNUSED UNUSED
HARDWARE STATUS BITS (6 of 6)
Figure A2-1 — Hardware Status Bits (6 of 6)
235-200-150
January 2003
APPENDIX 2
PROCESSOR RECOVERY MESSAGES
Issue 3.00 Page A2-25
To Next Page
Loading...