MacDon DWA - Predelivery Checklist

Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. The completed checklist should be
retained by either the Operator or the Dealer.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to
hazards and unsafe practices.
DWA Serial Number:
Table 1 DWA for M-Series Self-Propelled Windrower Predelivery Checklist

Item
Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque. 6.1 Torque Specifications, page 103
Check that shipping stands have been correctly installed
on the header.
2.5 Ins tall
ingtheDeck,page30
Check and adjust front skid to correct height above the
draper. Tighten securing nuts.
4.1.5 Adjusting Front Skid, page 70
Check and adjust rear deflector to correct height above
the draper. Tighten securing nuts.
4.1.6 Adjus ting Rear Deflector, page 71
Check external draper roller seal condition. Seal should
be secure and w ithout gaps.
4.1.7 Ma
intaining the Draper Roller, p a ge 71
Check that draper pivot points are properly greased.
4.2 Lubricating the Double Windrow Attachment,
page 76
Date Checked: Checked by:
214049
12
1
Revision A