MacDon DWA - 3.5 Adjusting the Deck Angle

OPERATION
3.8 Positioning the Conditioner Rolls
The gap between the conditioner rolls needs to be small enough to properly throw the crop onto the Double Windrow
Attachment .
The gap size depends on the crop type and yield.
• A gap that is too small for a heavy crop will use excessive engine power and be h ard on affected components.
• A gap that is too large will not throw the crop with enough velocity to reach the side delivery deck.
Refer to the conditioner roll adjustment procedure in your A-Series or R-Series operator’s manual.
214049 64 Revision A