215620 14 Revision A
• Disengage the header drive, put the transmission in Neutral,
and wait for all movement to stop before leaving the
operator’s position.
• Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
• Engage the safety locks to prevent lowering of the header or
reel before servicing the header when it is in the raised
position.
• Use a slow-moving vehicle emblem and activate the
machine’s warning lights when operating on roadways,
unless these actions are prohibited by law.
SAFETY
To Next Page
Loading...
