MacDon M1 Series - Predelivery Checklist

215620 251 Revision A
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number: Engine Serial Number:
M1 Series Predelivery Checklist
üü
Item
Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque. 6.3 Torque Specifications, page 240
Check tire air pressures and adjust as required. 4.1.13 Checking Tire Pressure, page 108
Check wheel drive hub lubricant level.
4.1.11 Checking and Adding Wheel Drive Lubricant –
10 Bolt Wheels, page 107
Check engine coolant level and strength at pressurized
coolant tank.
4.1.5 Checking Engine Coolant Level, page 99
Check air cleaner and clamps. 4.1.2 Checking Engine Air Intake, page 96
Check engine oil level and check for leaks. 4.1.6 Checking and Adding Engine Oil, page 99
Check hydraulic oil level and check for leaks along lines.
4.1.3 Checking and Adding Hydraulic Oil, page 97
Check fuel separator for water and foreign material, drain
and clean as necessary, and add fuel.
4.1.4 Checking Fuel Separator, page 98
Check gearbox lubricant level.
4.1.7 Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M1170, page 101 or 4.1.8
Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M1240, page 102
Check tension of A/C compressor belt.
4.1.9 Checking Air Conditioning Compressor Belts,
page 103
Check that machine is completely lubricated. 3.16.2 Lubrication Points, page 90
Check Operator’s Presence System. 4.2.1 Checking Operating Safety System, page 111
Check horn operation. 4.2.6 Checking Horn, page 123
Start engine and run to operating temperature.
4.1.10 Starting Engine – M1240 Windrower, page
104
Check HPT, fuel, and diesel exhaust fluid (DEF) gauges for
operation.
4.2.2 Checking Harvest Performance Tracker Display
Gauges, page 112
Check engine speed on HPT. 4.2.3 Checking Engine Speed, page 118
Ensure selective catalytic reduction (SCR) conditioning inhibit
is off.
4.2.4 Checking Selective Catalytic Regeneration
Conditioning Mode, page 119
Check that air conditioning and heater are functioning
properly.
4.2.8 Checking Climate Controls, page 124
Check that interior lights are functioning properly. 4.2.7 Checking Interior Lights, page 124
Check that exterior lights are functioning properly.
4.2.5 Checking Exterior Lights, page 120