215620 81 Revision A
3.12 Installing Air Inlet Duct
The air inlet duct prevents large debris from entering the engine.
1. Retrieve the air inlet duct from inside the cab and remove the plastic cover from the breather tube.
2. Ensure there are no parts or debris inside the inlet duct.
Figure 3.82: Air Inlet Duct
3. At the rear right corner of the cab roof, set air inlet duct (A)
over the breather tube, and rotate to align the predrilled
holes for setscrew (B).
4. Tighten setscrew (B) and tighten tube clamp (C) to secure
the duct onto the breather tube.
ASSEMBLING WINDROWER
To Next Page
Loading...
