215620 26 Revision A
Figure 2.5: Windrower Shipping Assembly on Blocks
4. Lower windrower onto 152 mm (6 in.) blocks (A) as shown.
5. Remove the chains from the shipping frame.
6. Check for shipping damage and missing parts.
2.2.2 Moving to Assembly Area – Forklift Method
The windrower can be moved to the assembly area using a forklift.
DANGER
To prevent injury to bystanders and to avoid striking them with machinery, do NOT allow people to stand in the
unloading area.
DANGER
The equipment used for loading or unloading a header must meet or exceed the requirements specified in this
document. Using inadequate equipment may result in chain breakage, vehicle tipping, machine damage or bodily harm
to operators or bystanders.
IMPORTANT:
Refer to the shipping assembly specifications in Table 2.1, page 27 and consult your forklift distributor to determine a
suitable forklift.
UNLOADING WINDROWER
To Next Page
Loading...
