Section
Summary of Change Internal Use
Only
4.2.10 Setting Radio for USA or European
Region, page 126
Added procedure. Product
Support
4.4 Performing Final Steps, page 129
• Step 2, page 129
Added illustration of parts bag label for clarity.
ECN 57725
5.1.1 Attaching A40DX Auger Header, page 131
• Step 3, page 131
Added callout to illustration for clarity.
Technical
Publications
5.1.3 Detaching an A40DX Auger Header, page
140
Added topic.
Technical
Publications
5.2.2 Attaching D1X or D1XL Series Draper
Header, page 146
• Step 2, page 146
Added step and illustrations for removing R85/R2
forming shield parts.
Technical
Publications
5.3 R85 Rotary Disc Header– M1240 Windrower
Only, page 162
5.3.1 Attaching R85 Rotary Disc Header, page
162
5.3.2 Connecting R85 Rotary Disc Header
Hydraulics, page 166
Added R85 topics for reference only.
Technical
Publications
5.4 R1 Series Rotary Disc Header, page 173
Separated all Attaching/Connecting R1 Series Rotary
Disc Header topics from Attaching/Connecting R2
Series Rotary Disc Header topics for clarity.
Technical
Publications
5.5 R2 Series Rotary Disc Header, page 196
Separated all Attaching/Connecting R2 Series Rotary
Disc Header topics from Attaching/Connecting R2
Series Rotary Disc Header topics for clarity. Added
M1170 to all R2 topics.
Technical
Publications
5.7.1 Calibrating Knife Drive on Harvest
Performance Tracker Display, page 230
Revised procedure and added more illustrations for
clarity.
Technical
Publications
6.1 Lubricants, Fluids, and System Capacities,
page 237
Updated anti-freeze specification.
ECN 62224
215620 iii Revision A
To Next Page
Loading...
