215620 76 Revision A
Figure 3.69: Fuel Vent Hose Routing
6. Route fuel vent hose (A) up into the rear handrail.
Figure 3.70: DEF Supply Hose Connectors
7. Press gently on lock (A) and pull on the connector to
separate the DEF supply lines from the shipping pin. Discard
the pin (not shown).
Figure 3.71: DEF Supply Module
8. Remove the caps from the DEF supply module and connect
the hoses as follows:
• Red hose to inlet port (A) on the supply module.
• Yellow hose to backflow port (B) on the supply module.
• Press down on the connectors until they click.
ASSEMBLING WINDROWER
To Next Page
Loading...
