Auto·
User·
When
the eXplorist
is
placed
in
the simulator
mode,
it simulates movement along a
predefi
ned
or
saved
route.
1.
Press
MENU.
2.
Use
the
Arrow
joystick to highlight Adv. Features.
3.
Press
ENTER.
4.
Use
ttle
Arrow
joystick to highlight Simulate.
75
Communications
5.
Press
ENTER.
6.
Highlight the desired option:
Off -
Turns
the simulator off
Auto -
Uses
a predefined route. (This
is
a 3-leg route
in
the
shape
of a triangle with
your present position
as
the starting point.)
User
-
Uses
the
same
predefined route
as
Auto, but provides a
way
to change the
heading
and
speed.
The
simulator will follow the heading
and
speed,
even
when
if
this
means
it doesn't follow the predefined route.
7.
If
you
have
an
active track
log
being recorded, the simulator will
need
to delete this
track. A warning
is
displayed that your track will
be
deleted. Highlight
Yes
and
press
ENTER
to
erase
the track
and
continue.
8.
An
alert
is
displayed indicating that the simulator
has
been
turned
on.
Press
ENTER.
9.
Press
NAV
to return to the last
viewed
Map screen.
Simulating
on
a
Saved
Route
1.
Follow the instructions
above
to turn the simulator
on.
2.
After
you
have
returned to the last
viewed
Map
screen,
press
MENU.
3. Highlight Routes.
4.
Press
ENTER.
5.
Highlight a
saved
route to
use.
(Note:
You
will notice a
new
route
whose
name
is
bolded indicating that it
is
the active route. This
is
the predefined route that the
simulator
has
created.
Do
not select this route if
you
are
wanting
to
view
a route
you
have
created.)
Press
ENTER.
6. Highlight
Activate
Route.
7.
Press
ENTER.
To Next Page
Loading...
Need help?
General
