EasyManuals Logo

Magellan eXplorist User Manual

Magellan eXplorist
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
82
I
OK
I
Turn
it
on
:
Transfer:
range>'···········:,:··················,··········,·,,··
, "
........................................................•.................................................................
,.
6. Click
on
the
OK
button.
7.
Select the location for the fi
Ie
to
be
saved.
(By
default this
is
the 'Geocaches' folder
in
the internal
memory
or
on
the
SD
card.)
8. If the transfer
is
successful,
an
alert will
be
displayed.
9.
You
are
now
able
to
access
and
create a
GOTO
to
any
of the geocache points
following the instructions for creating a
GOTO.
(Geocache
points
can
also
be
used
in
multi-leg routes but the most common
usage
will
be
in
a
GOTO.)
Uploading to the Magellan eXplorist
1.
Turn
the eXplorist off
and
connect it to the
USB
port
on
your computer.
2.
Turn
the eXplorist
on.
If connected correctly, it will
begin
in
the
USB
File Transfer
mode
or
the Communications
menu
is
displayed. (If the Communications
menu
is
shown,
select USB File
Transfer
and
press
ENTER.) If neither of these screens
is
displayed there
maybe
a
bad
connection.
Turn
the eXplorist off
and
check the
connections
and
try again.
The
eXplorist must
be
in
the
USB
File Transfer
mode
for geocache points to
be
uploaded.
Note:
By
default the eXplorist will
save
to its internal
memory.
If
you
want to
save
to the
SD
card
instead, from the
USB
File Transfer
screen
you
need
to:
Press
ENTER
Highlight USB File
Transfer
and
press
ENTER.
Highlight
SD
Card
and
press
ENTER.
3. Select the files to
be
uploaded. (If
no
files
are
selected, it
is
assumed
that
you
want to upload the entire list.)
Ti
ps
on
selecti
ng
fi
les:
To
select a single geocache point, click
on
the
name.
To
select multiple, consecutive geocache points, hold the Shift
key
down
while
clicking
on
the geocache point
names.
To
select multiple, non-consecutive geocache points, hold the Ctrl
key
down
while clicking
on
the geocache point
names.
4. Click the Upload
Icon
on
the Magellan
Geocache
Manager.
5.
Make
sure
that the correct radio button
is
selected (All
Geocaches
or
Selection).

Table of Contents

Other manuals for Magellan eXplorist

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Magellan eXplorist and is the answer not in the manual?

Magellan eXplorist Specifications

General IconGeneral
Resolution240 x 320 pixels
Battery Life18 hours
WaterproofIPX7
Update Rate1 second
Waypoints500
Routes20
SBASWAAS/EGNOS
Memory ExpandableNo
Screen Size2.2 inches
Battery Type2 AA batteries
Dimensions1.3 inches
Accuracy3 meters
Dimensions (inches)1.3"
MapsBasemap
Weight (oz)5.3 oz (with batteries)

Related product manuals