As
you travel with your eXplorist receiver on,
it
will
continuously record your track. Track is then a history of
everywhere you have gone. At anytime you want to reverse your
direction and head back to where you started, you can create a
Backtrack route. This route will
automatically
be
computed
using
the
track
history stored in your eXplorist receiver.
Creating a Backtrack Route
From any screen, press
Menu.
Use
the
arrow
joystick
to
highlight
"Track Log" and press
...,
Enter.
With Active Track high-
lighted, press
n!I
Menu.
•
.1
Mc!mory\Track
Logs
(y
Up One Level
E:ltStth
...
EJ
TrackLog 1
Legs Distance
0.00
(
Stop
Logging
[ Save
Clear'
Track
Convert
to
Route
View
on
Map
Help
Active Track is
the
active
track
history si nce
the
last
time
track
was cleared.
Other Track Logs in
the
Iist are
track
logs
that
you
have saved for
future
use.
Highlight
"BackTrack" and
press
-+J
Enter.
You
will
return to
the
Nav screen and
begin seeing information
to
guide
you along your
track
back
to
your
point
of origin.
Your
track
history may go back
further
then your intended
destination.
You
may want
to
clear your
track
(from
the
Track Log menu above,
highlight
"Clear Track" and press
Enter) before you begin your travels
so
when you do a
backtrack route,
it
is
limited
to
just
the
track
history desired.
You
can also save your
track
history using the Save
command from the "Track Log" option or convert the track
to
one of your saved routes
with
the "Convert to Route"
option. This will allow your eXplorist receiver
to
guide you
over the same path at a
future
date.
To Next Page
Loading...
Need help?
General
