Setting
Alarms,
& Beeper
The eXplorist has five alarms
that
you can use to provide you
with audible alerts when
their
predefined condition is met.
Anchor
Alarm: Set a distance
that
the alarm will sound when the
eXplorist has moved from its location. (Example: you have
anchored your boat and want to
be
alerted when
it
has drifted
from its anchor point.)
Arrival Alarm: Set the distance from your final destination
that
the alarm will sound when traveling
on
a route.
Off
Course Alarm: Set the distance
that
the alarm
will
sound
when you have moved off of the calculated course
that
you
should
be
on
when navigating
on
a route.
GPS Fix: Turn
an
alarm
on
or
off
that
will sound whenever the
eXplorist loses its
GPS
fix.
Proximity Alarm:
If
using a
multi
leg route, proximity alarm sets
when
an
alarm will sound
as
you approach the destination of each
leg in your route.
Setting the Clock
The eXplorist receives constant
time
information from
the
atomic
clock
in the
GPS
satellites
but
you can set how
time
is
displayed
as
well
as
providing information for automatic
corrections for dayl ight savi ngs.
Format: Time can
be
format to
be
displayed in Local
24
Hrs
(military time), Local AM/PM or UTC. When selecting Local
24
Hrs or Local AM/PM,
you
are
given the option of changing the
time.
Daylight Savings: The eXplorist can
be
set to automatically
change the displayed
time
to reflect
time
changes caused
by
daylight savings.
You
can select from United States, European
Union or Customize to set your own start and stop dates.
To Next Page
Loading...
Need help?
General
