Magnetek Impulse G+ series 4 User Manual

IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
5-93
40 through FF
Flt Annunciate
ON/CLOSED: When specific fault condition are detected (see Fault Annunciation)
OFF/OPEN: Normal operation
102 through 1FF** Parameter Settings 2 through FF with inverse output.
Display Function
* This output does not have an inverse output
** Contact will open when power is disconnected

Magnetek Impulse G+ series 4 Specifications

General

Brand	Magnetek
Model	Impulse G+ series 4
Category	Controller
Language	English