MAN B&W 11.01
Page 1 of 1
MAN Diesel
MAN B&W MC/MCC, ME/MEC/MEGI/ME-B engines 198 46 965.3
The water cooling can be arranged in several con-
figurations, the most common system choice be-
ing a Central cooling water system.
Advantages of the central cooling system:
• Only one heat exchanger cooled by seawater,
and thus, only one exchanger to be overhauled
• All other heat exchangers are freshwater cooled
and can, therefore, be made of a less expensive
material
• Few noncorrosive pipes to be installed
• Reduced maintenance of coolers and compo-
nents
• Increased heat utilisation.
Disadvantages of the central cooling system:
• Three sets of cooling water pumps (seawater,
central water and jacket water.
• Higher first cost.
For information on the alternative Seawater Cool-
ing System, see Chapter 12.
An arrangement common for the main engine
and MAN Diesel auxiliary engines is available on
request.
For further information about common cooling
water system for main engines and auxiliary en-
gines please refer to our publication:
Uniconcept Auxiliary Systems for Twostroke Main
The publication is available at www.mandiesel.com
under ‘Quicklinks’ → ‘Technical Papers’
Central Cooling Water System
To Next Page
Loading...
Need help?
General
