MAN B&W 17.02
Page 2 of 3
MAN Diesel
MAN B&W S70MC/MC-C, L70MC-C,
S65MC-C, S60MC/MC-C, L60MC-C,
S50MC/MC-C, S50ME-B8
198 66 44-9.2
Preparation for compensators
If compensator(s) are initially omitted, the engine
can be delivered prepared for compensators to be
fitted on engine fore end later on, but the decision
to prepare or not must be taken at the contract
stage, option: 4 31 212. Measurements taken dur-
ing the sea trial, or later in service and with fully
loaded ship, will be able to show if compensator(s)
have to be fitted at all.
If no calculations are available at the contract
stage, we advise to make preparations for the
fitting of a compensator in the steering compart-
ment, see Section 17.03.
Basic design regarding compensators
For 5-cylinder engines, the basic design regarding
2nd order moment compensators is:
• With compensator aft, EoD: 4 31 203
• With compensator fore, EoD: 4 31 213
For 6-cylinder engines, the basic design regarding
2nd order moment compensators is:
• With compensator aft, EoD: 4 31 203
• Prepared for compensator fore, EoD: 4 31 212
The available options for 5 and 6-cylinder engines
are listed in the Extent of Delivery. For 4-cylinder
engines, the information is available on request.
To Next Page
Loading...
Need help?
General
