MAN B&W 4.01
Page 6 of 6
MAN Diesel
198 43 000.2MAN B&W K98MC/MC-C/ME/ME-C, S90MC-C/ME-C,
K90MC-C/ME/ME-C, S80MC/MC-C/ME-C, K80MC-C/ME-C,
S70MC/MCC/ME-C/ME-GI, L70MCC/ME-C, S65ME-C/ME-GI,
S60MC/MC-C/ME-C/ME-GI/ME-B, L60MC-C/ME-C,
S50MC/MC-C/ME-C/ME-B
Yard deliveries are:
1. Cooling water pipes to the builton lubricating
oil cooling system, including the valves.
2. Electrical power supply to the lubricating oil
standby pump built on to the RCF unit.
3. Wiring between the generator and the operator
control panel in the switchboard.
4. An external permanent lubricating oil fillingup
connection can be established in connection
with the RCF unit. The system is shown in Fig.
4.03.03 ‘Lubricating oil system for RCF gear’.
The dosage tank and the pertaining piping
are to be delivered by the yard. The size of the
dosage tank is stated in the table for RCF gear
in ‘Necessary capacities for PTO/RCF’ (Fig.
4.03.02).
The necessary preparations to be made on
the engine are specified in Figs. 4.03.01a and
4.03.01b.
Additional capacities required for BWIII/RCF
The capacities stated in the ‘List of capacities’ for
the main engine in question are to be increased
by the additional capacities for the crankshaft
gear and the RCF gear stated in Fig. 4.03.02.
To Next Page
Loading...
Need help?
General
