Control and operation
86
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
Fuel consumption page
The following values can be queried:
S Engine speed (RPM)
S Fuel consumption
S Drive lever position
S Relative load
S Trip fuel consumption
S DEF/AdBlue
®
/AUS32/AUS40
consumption*
S DEF/AdBlue
®
/AUS32/AUS40 overall
consumption*
S Engine operating hours
* Query only possible for engines with
aftertreatment system.
The “trip” consumption can be reset using the
Reset button.
Display representation with “Twin engine system”
Video page
The symbol is only available if the screen is activated under Settings.
Can be used to monitor the engine room.
To Next Page
Loading...
Need help?
General