Matrox C Series - MURAIPXI-E2 MF, MURAIPXI-E2 MHF, MURAIPXI-D2 MF, and MURAIPXI-D2 MHF; Connection Overview; Desciption of Supported Connections

36 Matrox Display Wall – User Guide
MURAIPXI-E2MF, MURAIPXI-E2MHF, MURAIPXI-D2MF, and
MURAIPXI-D2MHF
Connection overview
Desciption of supported connections
WA R N I NG : To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your Matrox product,
carefully remove the DisplayPort cable by
pressing the latch on the top of the DisplayPort
connector while removing the connector.
Device connector Description
DisplayPort If your video device has a DisplayPort connector, attach your
DisplayPort to DisplayPort cable to your Matrox card. Connect the
other end of the cable to your video device.
DVI If your video device has a DVI connector, use a DisplayPort to DVI
adapter (active
*
) to connect to the mini DisplayPort connector on your
Matrox card. Connect your video device to the DVI connector on your
adapter.
* Only active adapters (sold separately) are supported. Passive adapters aren’t supported.
HDMI If your video device has an HDMI connector, use a DisplayPort to
HDMI adapter (active
*
) to connect to the mini DisplayPort connector
on your Matrox card. Connect your video device to the HDMI
connector on your adapter.
Network
(RJ-45)
If your video device streams to an IP network, connect a network
cable to your Matrox card. Your video device must stream using an
RTSP, RTP, SRT, or MPEG-2 TS protocol.
DisplayPort to
DisplayPort cables
Network cable
(RJ-45)