84 Matrox Display Wall – User Guide
Description of supported connections
Matrox M9128 LP PCIe ×16
Connection overview
Description of supported connections
Device
connector Description
DVI If your monitor has a DVI connector, connect your monitor cable directly to
a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to your
output cable.
WA R N I NG :
To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your graphics
hardware, carefully remove the DisplayPort
cable by pressing the latch on the top of the
DisplayPort connector while removing the
connector.
Device connector Description
DisplayPort If your monitor has a DisplayPort connector, attach your monitor
cable to the DisplayPort connector on your Matrox card. Connect the
other end of the cable to your monitor.
Monitor connector
(DisplayPort
To Next Page
Loading...
