44 Matrox Display Wall – User Guide
Description of cables
Description of supported connections
Cable Description
Output Mura MPX-4/0 cards use KX20 to quad-DVI
cables to connect up to four (4) monitors per
card.
Monitors are numbered consecutively
based on which connector each is attached
to, starting with connector labeled 1.
Device
connector Description
DVI If your monitor has a DVI connector, connect your monitor cable directly to
a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to your
output cable.
To Next Page
Loading...
